Offline

Production

Batch Time Planner

Turn your desired round count into a realistic press schedule with QC and component checks.

The number of accepted, completed cartridges you want after expected rejects are removed.

How many good rounds you want boxed when you are done.

Your sustainable production rate after the press is set up. Use a measured average, not the press manufacturer maximum.

Use your realistic sustained rate, not a momentary peak.

Total fixed time for die setup, component loading, cleanup, and putting equipment away.

Include primer tube fills, die changes, and cleanup.

Percentage of pressed rounds pulled aside for additional dimensional, charge, or visual quality checks. This does not replace inspecting every round as required by your process.

Percent of rounds you will check for charge/COAL/primer seating.

Estimated percentage of attempted rounds that will be rejected or disassembled. The planner increases the press quantity to still meet your finished-round goal.

Covers pulled bullets, crushed cases, and any misfeeds.

Active bench time between planned breaks. Enter 0 if you do not want breaks included.

Optional pacing check. Add a short reset every N minutes.

Duration added after each completed work interval.

Only applied if a break frequency is set.

Published powder charge used only to estimate total powder needed. This planner does not determine whether a load is safe.

Optional. Enables powder demand and jug checks.

Usable powder inventory in pounds. One pound equals 7,000 grains. Keep powder lots separate when your loading process requires it.

Leave blank to skip the powder sufficiency check.

Optional count for readiness check.

Optional count for readiness check.

Rounds to press —
Total time —
QC pulls —
Powder needed —

Schedule

Session outline

Time budget with breaks and QC woven in.

  • Enter your targets to see a breakdown.

Readiness

Component check

Verifies you have enough powder, primers, and bullets for the plan.

  • Add component counts to see go/no-go notes.